Commercial gate operator installation, repair and maintenance in Miami. Operators for swing and sliding gates, barrier arms, and the access control behind them, fitted to the gate you already have. Slide operators start at $4,750 installed, commercial swing at $6,950 and barrier arms at $4,950.
Operators for cantilever and track-mounted sliding gates at commercial properties, HOA communities, and industrial facilities. A CAME BK commercial slide operator starts at $4,750 installed, a LiftMaster SL3000UL at $6,950, and the industrial units run to $9,250.
Automatic operators for single and double swing gates on properties of all sizes. Commercial swing operators run from $6,950 to $9,150 installed.
Keypads, card readers, telephone entry systems, and remote access solutions for secure entry management.
Serving South Florida since 2021.
Full protection for your peace of mind.
Transparent pricing, no hidden fees.
Every photo in this section is our own work across Miami-Dade, Broward and Monroe County.
The doors, finishes and hardware we fit across South Florida.
A CAME BK commercial slide operator starts at $4,750 installed and a CAME GARD LT4 barrier at $4,950 with the arm included. On LiftMaster, commercial slide gate operators start at $6,950 installed for an SL3000UL or a CSL24UL, with the heavy-duty and industrial slide units from $8,450 to $9,250. Commercial swing operators run $6,950 to $9,150, with the CSW24UL at $6,950. LiftMaster barrier arms start at $7,050 with the arm included and the industrial barrier is $10,350. Every one of those packages includes the monitored photo eye UL 325 requires, and the slide operators also carry the resistive sensing edge for the leading edge of the gate. Those figures are the operator and its installation on a gate that already has safe mounting and power at the post. Running power out to the gate, trenching and civil work, the gate leaf itself, loop detectors, access control hardware, permits, and any lift or freight are quoted separately after the site visit, because they depend on the property rather than on the operator.
We fit operators to cantilever and track-mounted sliding gates and to single and double swing gates, and we install barrier arm systems, for commercial properties, HOA communities, industrial sites and parking facilities. We do not build or hang the gate itself; the operator goes on a gate that is already there.
Yes. Keypads, card readers, telephone entry systems and remote access are all part of what we fit and program, so entry management is handled end to end.
We are an authorized LiftMaster dealer, including the CSL24UL and SL3000UL slide operators and the CSW24UL swing operator, each $6,950 installed, and an authorized dealer for SEA, CAME and Linear too.
Yes. We service existing gates and operators regardless of who installed them, including motor replacement, logic board faults, safety loops and photo-eye alignment. A commercial or HOA service call is $249, credited toward the repair. On a sliding gate a stainless steel drive chain is $649 up to 30 ft plus $22 a foot over that, a plain steel chain $349, and V groove wheels $249 for one or $399 for a pair; heavy gates and welded wheels are quoted after the visit.
It depends on the gate size, the operator and the site groundwork. We start with a free consultation and a written proposal so you have a schedule before anything is ordered.
Call now or request a free estimate online. Same-day service available across Miami-Dade, Broward and Monroe County.
