Eden Coast
Supply and installationEden Coast garage doors in Miami
The wood look that cannot rot, warp or feed a termite.
Eden Coast overlays steel garage door sections with composite materials instead of timber. There is no wood in the door, so there is nothing in it to crack, warp, split or grow mold in Miami humidity. All of its materials are made in the USA.
For your home
Eden Coast residential doors
Single family homes, townhouses and multi-bay garages. 4 to choose from. Every door is built to order, so each is priced by phone or after a free on-site measure, and no card claims a hurricane approval we do not hold on paper.
- Wood look
- Raised panel
- Louver
- Custom
Wood look
- 18 named designs
- Arch top on Dogwood, Magnolia, Providence
- Stain or paint
Special order, about 6 to 10 weeks to install. Typical estimate.
The named designs Eden Coast shows as its most popular, from Anderson to Williamsburg. Each is composite boards and trim laid over an insulated steel door, so it looks like a wood door without any wood in it.
Raised panel
- Raised, wave or recessed panel
- Custom panel layouts
- Stain or paint
Special order, about 6 to 10 weeks to install. Typical estimate.
Panel doors in composite over steel: a standard raised panel, a wave raised panel, or a custom layout with raised or recessed panels.
Louver
- Louver pattern overlay
- Painted or stained
- Matches shutters
Special order, about 6 to 10 weeks to install. Typical estimate.
A louver pattern built up in composite over the steel door, painted or stained. A natural match for louvered shutters.
Custom
- Built from your drawing
- Any paint colour
- Paint and stain together
Special order, about 6 to 10 weeks to install. Typical estimate.
Eden Coast builds to a drawing, so the door can follow the house: horizontal planks, a pattern of your own, any paint colour including black, or paint and stain on the same door.
From the Eden Coast brochure
Designs, windows and finishes
Every Eden Coast door is built to order, so this is what you can choose from, not stock on a shelf. Priced after a free measure of your opening.
| Named designs | Anderson, Asheville, Birmingham, Bridgemill, Cambridge, Charleston, Dogwood, Hampton, Hawthorne, Leatherwood, Louisville, Magnolia, Magnolia Arch, Providence, Saratoga, St. Augustine, Summerhaven, Williamsburg |
|---|---|
| Arch top shown on | Dogwood, Magnolia, Providence |
| Panel doors | Raised panel, Wave raised panel, Custom raised panel, Custom recessed panel |
| Louver | Painted or stained |
| Custom | Horizontal plank, your own drawing, paint and stain on the same door |
| Backing | V groove, bead board or smooth |
| Trim | Inlaid moldings on any design; routed or square edges |
| Finish | 8 stains, smooth (S1 to S8), 8 stains, wood grain (W1 to W8), Custom stain match, Any paint colour, black included, Paint and stain together |
| Stain codes | Smooth S1, S2, S3, S4, S5, S6, S7, S8; wood grain W1, W2, W3, W4, W5, W6, W7, W8 |
| Windows | Option A, Option B, Option C, Option D, Option E, Option F, Option G, Option H, Option I, Option J, Option K, or your own layout; glass can go in the third section |
| Glass | Standard double strength glass, Clear glass, Decorative frosted glass, Insulated antique glass, Impact glass, Faux glass |
| Hardware | Optional decorative hardware and clavos |
| Steel door | 2 inch insulated: polystyrene R 11.24 or polyurethane R 20.04 |
Approvals
Hurricane approvals
None of the Eden Coast literature we hold lists a Florida product approval or a Miami-Dade NOA. Eden Coast builds on steel doors, sometimes made by another door maker, so the hurricane approval for a finished door depends on the steel door underneath it. We confirm that approval for your exact door and size before we quote, and we do not quote it for a Miami-Dade or Broward permit without one.
Approvals on file: none yet. How we check approvals →
Lift types
Which lift does your garage need?
The space above the door and what is on the ceiling decide the lift. This is how each one travels.
- Standard lift Most homes Above the door: About 12 inches above the door
- Low headroom Beams, ducts, low ceilings Above the door: As little as 4 to 6 inches
- High lift Tall ceilings, car lifts Above the door: The extra lift plus about 12 to 18 inches
- Vertical lift Warehouses, high bays Above the door: About the door height again, plus 1 to 2 feet
All financing is subject to credit approval. Your terms may vary. Payment options through Wisetack are provided by our lending partners. For example, a $5,500 purchase could cost $253.54 per month for 24 months, based on a 9.9% APR, or $1,833.33 per month for 3 months, based on a 0% APR. Offers range from 0 to 35.9% APR based on amount requested and creditworthiness. Not all merchants and lending partners participate in 0% interest programs. Terms range from 3 - 120 months and may vary based on merchant, lending partner, or transaction size. State interest rate caps may apply. No prepaid finance charges or participation fees. See additional terms at wisetack.com/faqs.
Free, and no deposit
We measure, then we price it
Twenty minutes on site gets you a written number with the model, the finish and the wind rating on it.
Before you choose your Eden Coast door
Also on the truck
The other brands we carry
Door and gate motors
LiftMaster, Benincà, Viking, CAME and Raynor, residential and commercial.
Openers and operators
FAQ
Frequently asked questions
What is an Eden Coast garage door actually made of?
Steel sections overlaid with composite materials, in board thicknesses from 1/2 inch to 1 1/2 inches. Eden Coast overlays both commercial and residential steel sections the same way.
Will an Eden Coast wood look garage door mold or rot in Miami humidity?
No. The composite overlay is impervious to moisture, mold and mildew.
Do Eden Coast wood look doors attract termites or warp like real wood?
No, because there is no wood in them. No wood feeding insects, no cracking, no warping and no splitting.
Is an Eden Coast garage door insulated?
Yes. Eden Coast builds a 2 inch steel sandwich door with foam insulation, with a polystyrene foam core or a polyurethane foam core.
What is the R value of an Eden Coast garage door?
Eden Coast publishes an R value of 11.24 for the polystyrene foam door and 20.04 for the polyurethane foam door.
Is an Eden Coast garage door approved for Miami-Dade or Broward?
Not on the paperwork we hold. None of the Eden Coast literature we have lists a Florida product approval or a Miami-Dade NOA, and the approval for a finished door depends on the steel door it is built on. We confirm the approval for your exact door before we quote it for a permit.
What designs and windows does Eden Coast offer?
18 named designs such as Leatherwood, Birmingham, Magnolia and Providence, plus raised panel, louver and fully custom doors built from a drawing. Windows come in eleven standard layouts, Option A to K, or your own, with clear, frosted, insulated antique, faux or impact glass.
How much does an Eden Coast garage door cost?
Priced after a free measure. Every Eden Coast door is built to order, so we measure the opening, agree the design and finish, and then give you a written quote.
Where are Eden Coast garage doors made?
Eden Coast states that all of its materials are made in the USA.
Our work
Eden Coast doors we have installed in Miami-Dade, Broward and Monroe County
Our own photographs from our own jobs. These show the standard of the installation rather than one manufacturer's range, so not every door here is from Eden Coast. The Eden Coast collections are above.
Found the one?
We measure on site, confirm the wind rating your address needs, and give you a written price. Free, no obligation.